Product Description
- Collocate the Belt type winding head or Slider type winding head to reduce the cost.
- Hi-tech shuttle for highest efficiency.
- Separate speed controls for loading and winding.
- Accurately count length of loading by limited-switch.
- Accurately count turns of winding by photo-electricity sensor.
- Programmable winding direction, winding returns range (Turns or Angle) and segment winding angle.
- Accurately wire spacing by programmable controller.
- Memory capacity accommodates 999 sequences of parameters with off-power memory retention.
Machine Type | TT-H04A | TT-H06A |
SPEED | 1500RPM | 1200RPM |
COIL O.D. | 10~60mm | 10~60mm |
MIN.FIN. I.D. | 4mm | 5mm |
MAX. HEIGHT | 25mm | 45mm |
WIRE SIZE | 0.05~0.6mm | 0.05-0.8mm |
SHUTTLE DIAMETER | 98mm | 135mm |
SHUTTLE WIDTH | 2.4 2.8 3.0 3.4 4.7 6.3 7.9 | 4.7 6.3 7.9 9.5 12.7 15.6 |
Can respectively book winding heads of GORMAN slider control, belt and line sliding while giving the order. | ||
TT-H04A and TT-H06A have combined the US GORMAN winding heads with Taiwan electronic control and have the following properties:
•WINDING MOTOR: 370W AC motor, variable frequency drive, active break with electromagnet.
•SPREAD MOTOR: Stepping Motor
•POWER SOURCE: AC220V +10%, 50/60 Hz
•Hi-tech shuttle for highest efficiency
•Separate speed controls for loading and winding
•Accurately count length of loading by Photoelectric sensor switch
•Accurately count turns of winding by OMRON sensor
•Programmable winding direction, winding returns range (Turns or Angle) and segment winding angle
•Accurately wire spacing by programmable controller
•Memory capacity accommodates 999 sequences of parameters with off-power memory retention for more than ten years.
